Zte RSU82 User Manual Download Page 17

Page: 17 / 42

Chapter 1 Product Introduction

Table 1-3 Indicators on the RSU82 Panel

Indicator

Color

Meaning

Description

RUN

Green

Running

indicator

Slowly flashing (1 Hz): The system is operating

properly.

Lit: The system is being reset, started, or

loaded.

Unlit: The power supply is switched off or the

system self-detection fails.

ALM

Red

Alarm indicator

Unlit: There is no alarm.

Quickly flashing (5 Hz): There are critical

alarms, indicating that services may be

interrupted and faults should be resolved

immediately, such as power failure, PLL

unlocked, self detection failure, and link

disconenction at the optical interface.

Slowly flashing (1 Hz): There are minor alarms,

indicating that the system's performance is

degraded even if it operates continuously.

LNK1

Green

Connection in-

dicator of the

first-channel

optical inter-

faces/electrical

interfaces

Flashing: Optical/electrical interface 1 is

operating properly.

Lit: Optical/electrical interface 1 is not

operating properly (with optical signals).

Unlit: Optical/electrical interface 1 is not

operating properly (without optical signals).

LNK2

Green

Connection in-

dicator of the

second-chan-

nel optical in-

terfaces/elec-

trical interfaces

Flashing: Optical/electrical interface 2 is

operating properly.

Lit: Optical/electrical interface 2 is not

operating properly (with optical signals).

Unlit: Optical/electrical interface 2 is not

operating properly (without optical signals).

RF1

Red,

Green

Indicator of the

first-channel

transmission

link status, and

the standing

wave status

at the antenna

interface

Lit (green): RF output is normal.

Lit (red): There are alarms on the standing

wave of antenna.

Unlit: There is no RF output or the power

amplifier is switched off.

1-9

SJ-20111021104623-005|2012-12-20 (R1.5)

ZTE Proprietary and Confidential

Summary of Contents for RSU82











































Search results

Summary of Contents for RSU82

Reviews:

Related manuals for RSU82

Brands by name

Popular brands

Zte RSU82, User Manual

Search results

Summary of Contents for RSU82

Reviews:

Related manuals for RSU82

Brands by name

Popular brands