Chapter 4
Cabinet Installation
The ZXSDR BS8900A is an outdoor device that is directly floor-mounted. It can be installed
at a hill or roof. In general, a simple fence or house is required around the base station
where the equipment is installed in the hill or under a tower.
A concrete platform needs to be set up before the cabinet installation to protect the base
station equipment and ensure the normal usage of the communications equipment.
The ZXSDR BS8900A has three types of cabinets, the baseband cabinet (BC cabinet), RF
cabinet (RC cabinet), and battery cabinet (PC cabinet). These cabinets can be stacked or
installed side by side. The lower-layer cabinet in the stacked cabinet installation mode is
RC8910A or PC8910A. The upper-layer cabinet in the stacked cabinet installation mode is
BC8910A. The base does not accompany the delivery of these cabinets. The base needs
to be installed before the floor-mounted cabinet installation.
Table of Contents
Cabinet Installation Process .......................................................................................4-1
Floor Mounting the Cabinet ........................................................................................4-3
Installing Stacked Cabinets ......................................................................................4-16
4.1 Cabinet Installation Process
Flow for Floor-Mounting a Cabinet
For the flow for floor-mounting the ZXSDR BS8900A cabinet, see
Figure 4-1
.
4-1
SJ-20150203110107-011|2016-03-23 (R1.1)
ZTE Proprietary and Confidential
