Zte MF275R User Manual Download Page 68 | Manualshive

Page: 68 / 76

background image

68

FCC Compliance

This  device  complies  with  part  15  of  the  FCC  Rules.
Operation is subject to the following two conditions: (1) This
device  may  not  cause  harmful  interference,  and  (2)  this
device  must  accept  any  interference  received,  including
interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved
by  the  manufacturer  could  void  the  user’s  authority  to
operate the equipment.
NOTE: This  equipment  has  been  tested  and  found  to
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and  used  in  accordance  with  the  instructions,  may  cause
harmful  interference  to  radio  communications.  However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user

«
...
66
67
68
69
70
...
»

Summary of Contents for MF275R













































































Reviews:

No comments

Related manuals for MF275R

DUB-H4 - Hub - USB

Brand: D-Link Pages: 4

Brand: D-Link Pages: 2

Brand: BeeSecure Pages: 35

Brand: Abtus Pages: 15

MicroHub GUH274W3

Brand: IOGear Pages: 1

SET-2000 Oil/Sludge

Brand: Labkotec Pages: 15

MultiView CE-H26311-S1

Brand: SIIG Pages: 24

Brand: Voith Pages: 98

QSW-4600 Series

Brand: QTech Pages: 58

Brand: TRENDnet Pages: 32

Brand: Blackberry Pages: 10

Brand: DELTA DORE Pages: 3

Brand: Lutron Electronics Pages: 2

Solecis AVS-SL-PR-0201-0301

Brand: AMX Pages: 24

IMI SENSORS EX686B01

Brand: PCB Piezotronics Pages: 59

Champion SeriesKD-2x1CSK

Brand: Key Digital Pages: 6

Brand: rackit Pages: 24

OfficeConnect 3C16733A

Brand: 3Com Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands