Zte MF275R User Manual Download Page 64

Page: 64 / 76

• Do not use your device in dangerous environments

such as oil terminals or chemical factories where
there are explosive gases or explosive products being
processed.

• Please use original accessories or accessories that

are authorized by ZTE. Unauthorized accessories may
affect the device performance, damage the device or
cause danger to you.

• Do not attempt to dismantle the device. There are no

user serviceable parts.

• Do not allow the device or accessories to come into

contact with liquid or moisture at any time. Do not
immerse the device in any liquid.

• Do not place objects on top of the device. This may

lead to overheating of the device.

• The device must be placed in ventilated environment

for use.

• Do not expose the device to direct sunlight or store it

in hot areas. High temperature can shorten the life of
electronic devices.

• Do not allow children to play with the device or charger.

Summary of Contents for MF275R













































































Search results

Summary of Contents for MF275R

Reviews:

Related manuals for MF275R

Brands by name

Popular brands

Zte MF275R, User Manual

Search results

Summary of Contents for MF275R

Reviews:

Related manuals for MF275R

Brands by name

Popular brands