Appendix A Alarm Box Upgrade
A-5
Figure A.3-2 Setting the Port Properties
4. Start the alarm box and run the HyperTerminal. When the system counts
down the seconds (3 seconds), press any key. The system displays the
Boot
Password(3GPLAT or 3gplat)->
prompt.
Note:
If you do not press any key in three seconds, the system automatically loads
the version saved in the flash.
5. At this prompt, enter the password
3gplat
or
3GPLAT
. The BSP menu
appears, as shown in Figure A.3-3. Enter
?
if you need help.
