Alarm Box User Manual
5-2
4. To view the command list, enter
?
and press
Enter
. Table 5.2-1 lists the
commonly used commands.
Table 5.2-1 Command Description
Command Description
Basic Commands
?
Lists available commands provided by the
alarm box.
exit
Enables users to log off.
ping [Dest] [numpackets]
Sends the ping packets.
Clock [Year] [Mon] [Day] [Week]
[Hour] [Min] [Sec]
Sets the current time.
tcpCfgShow
Displays the TCP connection-related
information.
cfgTcpComm [Sequence] [Server
IP] [Port] [Group ID]
Sets up a TCP connection with the alarm
server.
udpCfgShow
Displays the UDP connection-related
information.
cfgUdpComm [Sequence] [Server
IP] [Group ID]
Sets up a UDP connection with the alarm
server.
cfgBureauNo [Bureau No]
Sets the bureau number of the alarm box.
bureaNoCfgShow [Module No]
Displays the bureau number of the alarm box.
cfgModuleNo
Sets the module number of the alarm box.
moduleNoCfgShow
Displays the module number of the alarm box.
CfgSmsXmit
Set the parameters for sending short
messages.
Routing-Related Commands
routeshow
Displays the current routing table.
routeadd [Dest] [Gateway]
Adds routing information to the routing table.
routedelete [Dest] [Gateway]
Deletes routing information from the routing
table.
routeFlashShow
Displays the routing information saved in the
flash.
routeSave [Dest] [Gateway]
Saves routing information in the flash.
routeErase [Sequence]
Erases routing information from the flash.
VLAN-Related Commands
VlanCfgShow
Displays all the VLAN configurations of the
alarm box.
VlanCfgAdd [Server IP] [VLAN ID]
Adds VLAN configurations.
