02418V10 • 11.08.2016/DC •
1-19
Adjustments
1.10.4 Adjust cut-off time
The cut-off time of the bobbin fi lling is adjustable (e.g. if small bobbins are not
fi lled properly or after backfi tting the winder towards bobbins with a greater
diameter).
• Pull via
JOGGING
automatically a new bobbin into the bobbin support, for
which applies the adjustment.
• Start winding process.
• Adjust the new cut-off time through counter clockwise respectively clockwise
rotation of the regulating screw. In the process
the spring will be lowered
or uplifted and the cut-off time will be modifi ed.
Regulating screw clockwise rotation
cut-off time earlier
lower charging level
Regulating screw counter clockwise rotation
cut-off time later
higher charging level
The cut-off time has been chosen correctly, when the bobbin is
reeled up to its brim. Avoid extremely fi lled or brimmed over
bobbins.
Regulating screw
Spring
Summary of Contents for Automatic Bobbin Winder
Page 2: ...Subject to change nderungen vorbehalten ZSK Stickmaschinen GmbH Printed in Germany GB 02418V10...
Page 24: ......
Page 25: ......
