54
TYPE OF PWC
Any type of watercraft as long as is approved and certified by the authorities in the country where it is used.
- Power requirement: 100 HP
- Maximum power requirements: 300 HP
Adaptors for Sea Doo, Yamaha, Kawasaki and Honda PWCs are available within the distribution network.
It is extremely dangerous and not recommended to remove the PWC buoyancy elements.
ADAPTATION TO THE PWC
To connect Flyboard® on the watercraft:
a) Remove the steering and reverse systems.
b) Assemble the pump interface (ref. FB03A08) with the appropriate adapter (PWC brand and model specific).
Adaptors are necessary for to allow assembly between Flyboard® and the PWC. They are available through the distribution network, and compatible
with all main brands: Sea Doo, Yamaha, Kawasaki and Honda. As the adaptor is not included in the Flyboard® kit, please ensure your dealer know
which PWC brand and model you intend to use with Flyboard®.
Adapting Flyboard® on Sea Doo Spark:
A specific adaptation system is available for the use of Flyboard® with the Sea Doo Spark (2 or 3 seaters, with or without IBR, recommended for
90HP version). Please refer to page 17 for complete assembly instructions.
WHERE TO PRACTICE FLYBOARD®?
Flyboard® can be used in both lakes and open seas when the minimum water depth of 4 meters is respected.
It is strictly forbidden to use the Flyboard® in confined spaces such as swimming pools etc...
Do not start the watercraft or use Flyboard® in insufficient water depths (less than 1 meter) with sandy bottom, it may damage
Flyboard® bearings.
In the event of such use, check the operation of all bearings before further use to avoid breakage of the equipment.
Warning, it is the responsibility of the user to make sure there is sufficient depth in the stretch of water used.
