Zotac G41-ITX series, User Manual

Page: 19 / 46

18
Intel G4X-ITX series Motherboard
Jumper Settings
This section explains how to configure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section
whenever in doubt.
CMOS Clear Jumper-JP1
Close Open * = Default setting.
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
Notice :
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the
frequency multiplier setting in CMOS setup is changed.
JP1 Selection
1-2* Normal
*
2-3 CMOS Clear
1
1
1
51
2
52
MINI_PCIE1
PCIE1
Expansion Slots
The motherboard contains two expansion slots, one Mini PCIE slot and one PCIE x16 slot.
Mini PCIE Slot-MINI_PCIE1
There is one Mini PCIE slot, reserved for the WiFi Module.
PCIE x16 Slot-PCIE1
There is one PCIE x16 slot reserved for graphics or video card that is fully compliant to PCI
Express 1.0.
Note: The PCIE x16 slot supports PCIE graphics cards, but does not support any PCIE
x1 device.