Zotac G41-ITX series, User Manual

Page: 12 / 46

11
Installing the CPU Fan
There are many different fan types that can be used with this motherboard. Follow the instruction
that came with your fan assembly. Be sure that the fan orientation is correct for your chassis type
and your fan assembly.
Installing Memory Modules
Your new motherboard has two 1.8V 240-pin slots for DDR2 (G41ITX-A)/1.5V 240-pin slots
for DDR3 (G41ITX-B) memory modules. These slots support 512 MB/1 GB/2 GB/4 GB DDR2
(G41ITX-A)/1 GB/2 GB/4 GB DDR3 (G41ITX-B) technologies. They also support dual channel
DDR2 (G41ITX-A)/DDR3 (G41ITX-B) memory technology up to 10.7 GB/s. There must be at
least one memory bank populated to ensure normal operation. Refer to the following recommen-
dations to install memory modules.
q
One DIMM : Install it into slot 1 or 2. You can install the DIMM into any slot, however, slot 1
is preferred.
q
Two DIMMs : Install them into slot 1 and slot 2.
Note that a memory module has a notch, so it can only fit in one direction. Refer to the following
procedure to install memory modules into the slots on the motherboard.
1. Unlock a DIMM slot by pressing the module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically into the DIMM
slot. The plastic clips at both sides of the DIMM slot automatically lock the DIMM into the
connector.
DDRII1/DDRIII1
DDRII2/DDRIII2
Hardware Installation