Please refer to your controller's user guide for advanced programming instructions as they
are a little different for every software.
LED NOTIFICATIONS
LED indicator on your smart plug will visually report power consumption and network range.
How to read LED indicator colors?
Burgundy = Smart Plug is off
Blue = 0 – 300 W
Cyan = 300 – 600 W
Green = 600 – 900 W
Yellow = 900 – 1200 W
Red = 1200 – 1500 W
Purple = 1500 – 1800 W
Purple blink = over 1800 W
LED Indicator Control
Parameter 27: You can choose how the LED indicator displays power consumption on the
smart plug
Values: 0 – LED indicator will display power consumption whenever the device is plugged in
(LED stays on at all times – default setting); 1 – LED indicator will display the level of power
consumption for 5 seconds only whenever the device is turned on or off (LED indicator will
stay off for most of the time)
Size: 1 byte dec.
How to test Z-Wave network range for my Smart Plug?
You can easily check if the Smart Plug is within your Z-Wave controller’s range. Here is how:
Press and hold the Z-Wave button for 6 to 9 seconds until the LED indicator turns violet. The
LED indicator will then report signal strength.
Flashing green = direct communication with the primary controller is established and still
being diagnosed
Solid green for 2 seconds = direct communication with the primary controller is stable
Flashing orange = direct communication with the primary controller is intermittent and being
diagnosed
Solid orange = communication quality is fair
Solid red = communication with the primary controller has failed
Press and release the Z-Wave button to exit testing mode.
NOTE: This function may only be activated once the Smart Plug has been included to a Z-
Wave network.
ADVANCED SETTINGS
If your controller’s software allows for advanced configuration and parameter adjustment,
you will be able to change and save the settings below and customize the Smart Plug’s
performance to serve your needs.
Overload Protection
