Zoomlion RT75, Operator'S Manual

Page: 144 / 178

07 - 54
RT75 Rough Terrain Crane
D. Moving the Crane to a Job-Site
(1) Do the items that follow before you move the crane:
(a) Start the engine.
(b) Idle the engine for a short interval to let the air pressure increase to the
correct level.
(c) Engage the swing lock.
(d) Apply the service brake.
(e) Release the parking brake.
(f) Move the gear selector
to the “F1” position.
Note
Make sure that you use the correct transmission gear when you move on rough terrain.
(2) The crane operates in the off-road conditions. If necessary, you can move the
crane on general roadways according to the related regulations. The crane must
hold the items that follow:


Lights


Flares


Flags
  Safety equipment
When you move the crane on hard surfaces, shift the transmission to High-speed
range. If not, the crane can be damaged.
When you move the crane, make sure that you are in the correct gear for the type of
travel. When you use the incorrect gear, you put too much load on the crane. When
the oil temperature is more than 121.1° C, stop the crane immediately. To decrease
the temperature: move the transmission shift lever to the “N” position. Operate the
engine at an RPM range between 1000 to 1200 rpm. The oil temperature decreases in
a short interval of time immediately. If it does not, you must examine the crane for a
different malfunction.
DO NOT stop the engine at this time.
Do not move the gear selector between forward and reverse when the crane is in
motion.
Caution
Caution
Caution