1
2
Turn power to the G9.2tt off,
disconnect the AC adapter
from the unit, and turn the
unit upside down.
Pedal adjustment fitting is visible
on rear of expression pedal 2.
Insert a 3 mm size hex wrench into the hole on
the underside of the left or right expression
pedal. To increase pedal firmness, turn the
wrench clockwise. To decrease pedal firmness,
turn the wrench counterclockwise.
1
2
Fully raise the expression pedal 2
at the right side of the unit.
Insert a 3mm size hex wrench into the fitting
on the outside of the panel. To increase
pedal firmness, turn the wrench clockwise.
To decrease pedal firmness, turn the wrench
counterclockwise.
A djus ting ve r tic a l torque for e xpre s s ion pe da l 1 /2
A djus ting hor iz onta l torque for e xpre s s ion pe da l 2
G9.2tt bottom view
3 mm size hex wrench
40 mm or longer
Loosen
Tighten
Expression pedal 2 of the G9.2tt is designed for operation with one foot. When the pedal is
fully turned to the right, pushing it strongly down, hitting it, or otherwise exerting strong force
on it will damage the pedal. Be sure to operate the pedal only within its designated range.
If you loosen the pedal too much, the internal screw may come off, and you will no longer be
able to tighten the pedal. Perform this operation with care.
If the screw should have come off inside the unit, contact your dealer or an authorized Zoom
service station.
Never try to open the cabinet of the G9.2tt yourself, and never turn power to the G9.2tt on if
the screw is unsecured inside the unit. Otherwise the electronic circuitry may be seriously
damaged.
Warning
Loosen
Tighten
3
4
Adjusting the Expression Pedal Torque
[Table 2]
The table below shows an example for Z-pedal operation when vertical direction is assigned to "PdlPosi V"
and horizontal direction to "PdlPosi H".
Z-Talking
This effect changes the guitar sound into a talking sound. When using the Z-pedal, vowels can be changed in various
ways by moving the pedal in the vertical or the horizontal direction.
Try assigning the vertical direction of the Z-pedal (P2V1 - P2V4) to the "Formant V" parameter and the horizontal
direction (P2H1 - P2H4) to the "Formant H" parameter.
PARM1
PARM2
PARM3
PARM4
Variation
1 ñ 5
Tone
0 ñ 10
Formant V
0 ñ 100
Formant H
0 ñ 100
Selects the sound variation
type caused by the pedal (see
Table 3).
Adjusts the tone.
Adjusts the formant [peaks in
the acoustic frequency
spectrum that characterize
vowels] (vertical direction of
pedal).
Adjusts the formant [peaks in
the acoustic frequency
spectrum that characterize
vowels] (horizontal direction
of pedal).
[Table 3]
The table below shows an example for Z-pedal operation when vertical direction is assigned to "Formant V"
and horizontal direction to "Formant H".
REVERB module
Z-Delay
This is a delay effect which allows adjustment of panning and mix level using the pedal.
Try assigning the vertical direction of the Z-pedal (P2V1 - P2V4) to the "Mix" parameter and the horizontal direction
(P2H1 - P2H4) to the "Pan" parameter.
PARM1
PARM2
PARM3
PARM4
Time
1 ñ
3000
FeedBack
0 ñ 100
Pan
L50 ñ R50
Mix
0 ñ 100
Adjusts the delay time.
Adjusts the amount of feedback. Adjusts the delay sound left/
right panning.
Adjusts the level of the effect
sound mixed to the original
sound.
Z-Dimension
This is a spatial effect which allows adjustment of depth, panning, and reverberation using the pedal.
Try assigning the vertical direction of the Z-pedal (P2V1 - P2V4) to the "Depth" parameter and the horizontal direction
(P2H1 - P2H4) to the "Pan" parameter.
PARM1
PARM2
PARM3
PARM4
Pan
L50 ñ R50
Depth
0 ñ 100
Decay
1 ñ 30
Mix
0 ñ 100
Adjusts the left/right panning
of the sound.
Adjusts the sound position
depth.
Adjusts the reverb duration.
Adjusts the mixing level of the
reverb sound.
Z-Tornado
This is a delay effect which causes the effect sound to swirl like a tornado.
Try assigning the vertical direction of the Z-pedal (P2V1 - P2V4) to the "Rate" parameter and the horizontal direction
(P2H1 - P2H4) to the "Width" parameter.
PARM1
PARM2
PARM3
PARM4
Time
1 ñ
3000
Rate
1 ñ 50
Width
L50 ñ R50
Mix
0 ñ 100
Adjusts the delay time.
Adjusts the modulation rate.
Adjusts the sound movement
range.
Adjusts the mixing level of the
delay sound.
max
min
max
min
max
min
max
min
1
2
3
4
1000 cent
-200 cent
+1 octave
0 cent
300 cent
0 cent
500 cent
0 cent
+1 octave
0 cent
1500 cent
300 cent
+1 octave
0 cent
+1 octave
0 cent
Vertical
direction
Horizontal
direction
Color
max
min
max
min
max
min
max
min
max
min
5
6
7
8
700 cent
0 cent
+1 octave
0 cent
+1 octave
0 cent
500 cent
-700 cent
+1 octave
0 cent
+2 octave
0 cent
-
(0 Hz)
0 cent
-1 octave
+1 octave
Vertical
direction
Horizontal
direction
Color
max
min
max
min
max
min
max
min
1
2
3
i
a
u
i
e
u
u
e
e
o
o
a
Variation
max
min
max
min
4
5
o
e
a
o
a
i
i
u
Vertical
direction
Horizontal
direction
Variation
max
min
Vertical
direction
Horizontal
direction
max
min
© ZOOM Corporation
Reproduction of this document, in whole or in part, by any means, is prohibited.
G9.2tt-Pedal Adjust-E-1
