manualshive.com logo in svg

Zoom B1 FOUR, Operation Manual, Page: 9 / 16

Share
Download
Zoom B1 FOUR Operation Manual Download Page 9

ZOOM B1/B1X

16

Changing the Way Patches Are Called Up 

In normal operation, changing a patch in play mode of the B1/B1X will be active immediately. This
means that the sound changes straight away when you make the selection.

In some cases, such as when the new patch is at a memory location not adjacent to the current one, this
method may not be ideal, because the sound will change in various ways as you switch through the
patches. In such a case, you may want to change the patch selection method to "pre-select". In this mode,
you first select the patch to use next, and then perform an additional step to activate the patch.

To change B1/B1X operation to pre-select, perform the following steps.

1.

Turn power to the B1/B1X on while 
holding down the [

Q

] foot switch.

The indication "PrE-SElEct" scrolls on the
display during startup.

2.

In play mode, use the [

W

]/[

Q

] foot 

switches to specify the patch to use 
next.

You can use the [BANK UP•TAP] key or a foot
switch (FS01) connected to the [CONTROL IN]
jack to switch only the bank (The B1X does not
support use of a foot switch.) 

The new bank or patch number specified by the
above step flashes on the display. The sound
does not change yet.

3.

When you have specified the patch to 
use, press both [

W

]/[

Q

] foot 

switches together.

The patch change is accepted, the display
changes from flashing to permanently lit, and the
sound changes.

4.

To return the B1/B1X to the normal 
patch selection method, simply turn 
power off and then on again.

The patch selection method is automatically reset
to conventional operation.

B 0

B 0

Using a Foot Switch or Pedal

 Using the foot switch (FS01) 
(B1 only) 

Simply connect the optional foot switch (FS01)
to the [CONTROL IN] jack of the B1 and turn
the unit on. This allows you to switch banks and
specify the tempo for rhythm patterns with the
foot switch.

Depending on the currently selected mode, the
foot switch operates as follows.

●

Play mode

Pressing the foot switch selects the next higher
bank.

●

Rhythm mode

When you press the foot switch two times or

The B1 is equipped with a [CONTROL IN] jack that allows connection of an optional foot switch or
expression pedal.
This section explains how to use this capability.

Using a Foot Switch or Pedal

ZOOM B1/B1X

17

m o r e ,   t h e   B 1   d e t e c t s   t h e   i n t e r v a l   a n d
automatically adjusts the tempo accordingly
(tap tempo function).

●

Edit mode

The foot switch has no effect.

Using the expression pedal 

With the B1, an expression pedal (FP01/FP02)
can be connected to the [CONTROL IN] jack
and used as a volume pedal or for adjusting a
certain parameter of an effect type in real time. 
With the B1X, the built-in expression pedal can
be used in the same way. The function of the
expression pedal can be selected and stored
individually for each patch. 

1.

To use an expression pedal with the 
B1, plug the FP01 or FP02 into the 
[CONTROL IN] jack and turn on the 
power. 

2.

Select the patch in which to use the 
expression pedal.

3.

Set the Module selector to a position 
other than "PLAY" or "RHYTHM".

The B1/B1X goes into edit mode.

4.

While holding down the [RHYTHM] 
key, use the [VALUE] knob to select 
the module to control with the 
expression pedal. Available settings 
are shown below.

HINT

• In the section "Effect Types and Parameters" (page

19 – 24), a pedal symbol indicates which effect
type/parameter is controlled by the pedal.

• When a module has been selected as control

target, but the effect type currently selected for
that module does not have a pedal symbol, the
expression pedal has no effect.

5.

Store the patch as required.

The expression pedal setting is stored for that
patch.

6.

Select this patch in play mode, and 
operate the expression pedal.

The respective parameter changes when you
operate the pedal (pushing the pedal down has
the same effect as increasing the value of the
parameter).

In the bypass condition, the expression pedal
always functions as volume pedal, regardless of
the setting made in step 4.

HINT

• The expression pedal operates also in edit mode.

• With the B1X, you can also use the [PEDAL

ASSIGN] key on the top panel instead of the
[RHYTHM] key and [VALUE] knob to select the
module to be controlled by the pedal. For details,
see page 26. 

Display

Control target

Disabled

Volume

COMP/LIMIT module

EFX module

DRIVE module

O F

V P

C P

W P

B P

MODULATION/DELAY 
module

REVERB/DELAY module

Display

Control target

M P

R P

Summary of Contents for B1 FOUR

















Reviews:

No comments