Effect Types and Parameters
ZOOM B1/B1X
22
■
MODULATION/DELAY module
This module comprises modulation and delay effects such as chorus, flanger, delay, etc. For
this module, the two items MODULATION/DELAY (effect type & parameter 1) and RATE/TIME
(parameter 2) can be set separately.
MODULATION/DELAY
(Type&Prm1)
RATE/TIME (Prm2)
Selects the MODULATION/
DELAY module effect type and
controls parameter 1 at the same
time.
Sets the value of parameter 2 for
the MODULATION/DELAY
module.
Chorus Rate
This effect mixes a variable pitch-
shifted component to the original
signal, resulting in full-bodied
resonating sound. Higher right-digit
setting values result in higher effect
sound level.
Adjusts the modulation rate.
Ensemble
This is a chorus ensemble with three-
dimensional movement. Higher right-
digit setting values result in higher
effect sound level.
Flanger
Rate
This effect produces a resonating and
strongly undulating sound. Higher
right-digit setting values emphasize the
characteristics of the effect.
Adjusts the modulation rate.
Step
Special effect that changes the sound
in a staircase pattern. Higher right-
digit setting values emphasize the
characteristics of the effect.
Mono Pitch
Shift
This is a monophonic pitch shifter (for
single-note playing) with reduced
flutter. Higher right-digit setting values
increase the level of the effect sound.
Sets the pitch shift amount in
semitones. "dt" results in a detune
effect.
HPS (Harmonized Pitch
Shifter)
Key
This is an intelligent pitch shifter that
automatically shifts the pitch of the
original sound along a major scale,
based on a preset key. Higher right-
digit setting values increase the level of
the effect sound.
Specifies the tonic for the scale used
for pitch shifting. The "o" symbol
stands for #.
C 1 C 9
1 5 0
E 1 E 9
F 1 F 9
1 5 0
TAP
S 1 S 9
M 1 M 9
1 1 2
D T
2 4
2
1
H 1 H 9
C
C O
,
D
D O
,
E
F
F O
,
A
A O
,
G
G O
,
B
Effect Types and Parameters
ZOOM B1/B1X
23
Vibrato
Rate
This is an automatic vibrato effect.
Higher right-digit setting values result
in deeper vibrato.
Adjusts the modulation rate.
Pitch Bend
Pedal Position
This effect allows using the expression
pedal to change the pitch in real time.
Right-digit setting values select the
pitch change type caused by the
expression pedal (see Table 1).
Sets the initial value for the pitch shift
amount (the value that is active when
the pedal is at rest). The original
sound/effect sound level balance also
changes according to the parameter 1
setting (see Table 1).
[Table1]
Detune Fine
By adding a slightly pitch-shifted
harmonic component to the input
signal, this effect produces a sound
reminiscent of a 12-string guitar.
Higher setting values increase the level
of the effect sound.
Allows fine-tuning of pitch shift in 1/
100 semitone units.
Delay
Time
This is a long delay with a maximum
setting of 5000 ms. Higher right-digit
setting values increase the level of the
effect sound and the feedback amount.
Sets the delay time. In the 10 - 1000
millisecond range, the adjustment is
performed in 10-ms steps (1 - 99,1.0).
Above 1 second, the adjustment is
performed in 100-ms steps (1.1 - 5.0).
Tape Echo
This effect simulates a tape echo with a
long delay time of up to 5000 ms. The
right-digit setting values determine the
level of the effect sound and the
feedback amount.
C 1 C 9
V 1 V 9
1 5 0
TAP
B 1 B 9
0 1 0
b1
b2
b3
b4
b5
0 cent
0 cent
0 cent
0 cent
0 cent
+1 octave
+2 octaves
-100 cent
-2 octaves
-
∞
Pedal fully depressed
(maximum)
Pedal fully raised
(minimum)
Type&Prm1
Prm2=0
Prm2=1.0
Pedal fully depressed
(maximum)
Pedal fully raised
(minimum)
Type&Prm1
Prm2=0
Prm2=1.0
b6
b7
b8
b9
-1 original sound
-700 cent + original sound
Doubling
-
∞
(0Hz) + original sound
+1 original sound
+500 cent + original sound
original sound
+1 original sound
N 1 N 9
0 2 5
D 1 D 9
1 5 0
TAP
T 1 T 9