ZOOM B1/B1X
18
Compressor
Limiter
Auto Wah
Resonance Filter
Octave
Tremolo
Phaser
AMPEG
SUPER BASS
SWR
ACOUSTIC
BASSMAN
Delay
Tape Echo
Analog Delay
Ping Pong Delay
Hall
AMP Sim.
ZNR
Chorus
Ensemble
Flanger
Step
Mono Pitch
COMP/LIMIT
EFX
DRIVE
EQ
MODULATION/DELAY
REVERB/DELAY
AMP
ZNR
Effect modules
Effect types
Effect Types and Parameters
Linking Effects
The patches of the B1/B1X consist of eight
serially linked effect modules, as shown in the
illustration below. You can use all effect
modules together or selectively set certain
modules to on or off.
Explanation of symbols
●
Module selector
The Module selector symbol
shows the position of the knob at
which this module/parameter is
called up.
●
Expression pedal
A p e d a l i c o n i n t h e l i s t i n g
indicates a parameter that can be
controlled with the built-in or an
external expression pedal.
When this item is selected, the parameter in the
module can then be controlled in real time with a
connected expression pedal.
●
Tap
A [ T A P ] i c o n i n t h e l i s t i n g
indicates a parameter that can be
set with the [BANK UP•TAP]
key.
When the respective module/effect type is
selected in edit mode and the [BANK UP•TAP]
key is pressed repeatedly, the parameter (such as
modulation rate or delay time) will be set
according to the interval in which the key is
pressed.
TAP
* Manufacturer names and product names mentioned in this listing are trademarks or
registered trademarks of their respective owners. The names are used only to illustrate sonic
characteristics and do not indicate any affiliation with ZOOM CORPORATION.
For some effect modules, you can select an effect type from several possible choices. For example, the
MODULATION/DELAY module comprises Chorus, Flanger, and other effect types. The REVERB/
DELAYmodule comprises Hall, Room, and other effect types from which you can choose one.
Effect Types and Parameters
ZOOM B1/B1X
19
■
PATCH LEVEL
■
COMP/LIMIT module
■
EFX (Effects) module
PATCH LEVEL (Prm)
Determines the overall volume level of the patch.
Sets the patch level in the range from 2 – 98, 1.0. A setting of 80 corresponds to unity gain
(input level and output level are equal).
This module comprises the effects that control the level dynamics such as compressor and
limiter.
COMP/LIMIT (Type&Prm)
Selects the COMP/LIMIT module effect type and adjusts the effect intensity.
Compressor
This is a compressor which keeps the level within a certain range by attenuating high-level
signals and boosting low-level signals. Higher setting values result in higher effect sensitivity.
Limiter
This is a limiter that suppresses signal peaks above a certain reference level. The right-digit
value adjusts the limiter reference level.
This module comprises modulation effects such as tremolo and phaser.
EFX (Type&Prm)
Selects the EFX module effect type and adjusts the effect intensity.
Auto Wah
This effect varies wah in accordance with the input signal intensity. Higher setting values result
in higher effect sensitivity.
Resonance Filter
This effect varies the frequency band of the resonance filter according to the input signal
intensity. Higher setting values result in higher effect sensitivity.
Octave
This effect adds a one-octave lower component to the original sound. Higher setting values
increase the level of the effect sound (one-octave lower sound).
Tremolo
This effect periodically varies the volume. Higher setting values result in faster modulation
rate.
Phaser
This effect produces sound with a pulsating character. Higher setting values result in faster
modulation rate.
Ring Mod (Ring Modulator)
This effect produces a metallic ringing sound. Higher setting values result in higher modulation
frequency.
2 1 0
C 1 C 9
L 1 L 9
A 1 A 9
F 1 F 9
O 1 O 9
T 1 T 9
P 1 P 9
R 1 R 9