Appendix D: Troubleshooting
55
Appendix D
Troubleshooting
The following are some problems you may experience and some
possible solutions to remedy the situation.
Problem
My X3’s LINK light is solidly lit, but I cannot connect to the
Internet.
Solution
There are several issues that could cause this problem. Check these
items:
•
Ensure that you are using the correct VPI, VCI and
Encapsulation settings.
•
If your Encapsulation begins with PPP, ensure that you have
typed your ADSL Username and Password correctly. (Note
that this is NOT the username and password you used to log
into the Zoom Configuration Manager on page 15.)
!
If you had the modem automatically configure its settings,
open the Basic Setup page, ensure that MANUAL is
selected, then select 7 from the Virtual Circuit
drop-down list. When the screen changes to show the
automatic configuration settings, select MANUAL again,
then enter the correct Username and Password in the
boxes provided. Click Save Changes and Write Settings
to Flash.
!
If you manually configured your modem, open the Basic
Setup page, ensure that MANUAL is selected, then enter
the correct Username and Password in the boxes
provided. Click Save Changes and Write Settings to
Flash.
Summary of Contents for ADSL X3
Page 1: ...ADSL X3 U S E R S G U I D E...
Page 60: ...3364 A 27333 2004...
