Zoom ADSL X3, User Manual

Page: 15 / 60

Chapter 1: Installation Instructions 15
Step 4: Establishing
Communication
You must set up the X3 so that it can communicate with your
Internet service provider. To do this, you must use the Zoom
Configuration Manager.
1111
Log in to the Zoom Configuration Manager:
a aa a
Open your Web browser and, in its address bar, type
http://10.0.0.2, then press the Enter key on your
keyboard.
Tip!
If you are using a Windows computer, a Zoom icon
should have been placed on your desktop automatically.
Instead of typing one of the addresses above in your Web
browser, you can double-click the Zoom icon.
b bb b
When prompted, type the following user name and
password in the appropriate boxes, then click OK. You
must enter them using lowercase letters.
User Name: admin
Password: zoomadsl
If you are not prompted for a user name and password, do
the following in this order: Recheck all connections; restart
the modem and computer; and reset the modem by
inserting a paper clip into the Reset pinhole in the center
of the modem’s back panel and holding it for five seconds.
The user name and password you enter here do not serve
the same purpose as any name and password that your
Internet service provider may have given you.