18
ADSL X6 Quick Start
The Passphrase is case-sensitive, so be sure to notice whether
each letter is capitalized.
4444
Click
Save Changes
and then
Write Settings to Flash
.
5555
Enter the Passphrase on all other wireless devices on the
network.
Every wireless network client needs to be set
individually.
Open the software that came with the device,
which should be running on the computer where the device is
installed. Find the configuration menu for security, choose
WPA, and enter the Passphrase, exactly as you entered it on
the X6 “Wireless Setup” page.
Your security setup
configuration is now complete!
Setting Up Security Using WEP
If all of your network devices DO NOT support WPA you can
use WEP to configure network security. WEP can be configured
two ways: 64-bit and 128-bit. They configure the same way. 128-bit
WEP provides a bit more security than 64, but it also tends to hurt
network performance. We recommend that most people configure
their WEP for 64-bit security.
1111
Click the Wireless button in the Zoom Configuration
Manager
. This will open the
Wireless Setup
menu.
2222
Go to
Encryption
(which should say “None”) and select
WEP-64 bit
(or
WEP-128
bit
for more security but
diminished network performance) from the drop-down menu.
Six new boxes should open directly below the
Encryption
box.
