16
Step 2:
Check that your APN is configured correctly. Enter the command
AT+QCFG=”apn/display”,1
to enable displaying the APN, then enter
AT+CGDCONT?
to display the APN. A typical response for the APN would
be:
CGDCONT=1, “IPV4V6”, “apn name”, 0
,
where apn name is the
name of the apn supplied by your provider. If your modem returns
ERROR
, then the APN is not configured. To set the APN enter the
following commands:
AT+COPS=2
modem will return OK
AT+CGDCONT=1, “IPV4V6”, “apn name”
AT+COPS=0
modem will return OK.
Contact your service provider for the correct APN name. If you can’t get
your APN name from your service provider, you can try the following
APN names:
Verizon users: vzwinternet
Summary of Contents for 4650
Page 3: ...3 Figure 1 ...
