10-FUEL TANK HOUSING ASSEMBLY
92
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1224100-010000 ZT250-S swell nail
2
2
1224100-033000 ZT250-S thread cap of the fuel tank
1
3
1251100-102000 Non-standard bolt M6×16 (304 stainless steel)
2
4
1274100-007000
ZT250-S flanging sleeve(φ6.4×φ9×6
＋
φ20×2)
2
A
B
C
D
E
Fig.1 FUEL TANK
HOUSING ASSEMBLY
Cover component in the fuel tank
PROCEDURE:
●
Oil tank middle cover assembly
The mid -cover component press the "Seat" button to open the cushion and remove the cushion.Use a small
cross screw knife to press down the center of the expansion nails, and remove the expansion nails of the back of
the middle cover (Figure A) and the front (Figure B).
Press the "Fuel" button to open the outer cover of the fuel tank.The expansion nail in the fuel tank (Figure C) is
removed and removed the fuel tank cover.Be careful not to pull nylon ropes
①
during the disassembly process.
Then pull the middle cover component from the rear to gradually pull out the buckle. At this time, the lock -
locking of the fuel tank has not been removed.
Lifting the middle cover component in one hand, remove the bolt) with one hand, and remove the band (shown
in Figure D).
Pull the right fuel tank decorative cover out, and remove the fuel tank lock cable
②
from the right fuel tank
decorative cover and the bile gap in the fuel tank.
Find the fuel tank lock cable plug (FigureE) and pull it off in the rear of the bile in the right cover and the fuel
tank, and then remove the middle cover component.Put the fuel tank cover to prevent the fuel volatilization and
the foreign body from falling into the fuel tank.
CAUTION:
●
During the disassembly process, the material should be protected to prevent damage to the paint surface.
●
Pay attention to the intensity and direction when removing the buckle to prevent damage to the buckle.
●
Pay attention to check whether the cable is directly pressed or interfered by other parts to prevent short circuit
caused by grinding the skin.
●
Near the parking lot, fireworks, answering or calling to prevent accidents should be prohibited.
