14-REAR COVER COMPONENT
104
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
4114200-003051 ZT310-X rear armrest (dark gray matte)
1
2
1250105-142093 GB5789M8×20(color Zinc)
5
3
1251112-001093 M6×16 Hexagon flange bolts (color Zinc)
2
4
1274100-057095
Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
6
5
1244100-052000
Buffer rubber of flanging bushing (φ8.5×φ14×1)
2
6
1251100-102000 Non-standard bolt M6×16 (304 stainless steel)
4
7
1244200-020000 ZT310-X Rear handrail right bubber
1
8
1244200-019000 ZT310-X Rear handrail left rubber
1
Fig.1 REAR COVER
COMPONENT
Rear hand armrest component
PROCEDURE:
●
Rear armrest assembly
The rear handrail components remove 2 bolts with 8#sleeves, and remove the band -hoe eloguary glue.
Remove 5 bolts with 12#sleeves and pull the back armrest to the back of the slope.
●
Rear armrest rubber pad assembly
The rear handrail padding component is turned to the back, removed the bolts with a hexagonal inner hexagon,
removed the band -hoe, and then removed the left cushion and the right cushion glue.
CAUTION:
●
During the disassembly process, the material should be protected to prevent damage to the paint surface.
●
The bottom of the rear armrest has a buckle with the tail skirt, and it cannot be directly used to prevent the
card buckle from broken.
