8-FRONT FORK COMPONENT
60
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
190100-409051 ZT310-VX right rearview mirror (dark gray)
1
2
1100100-831000
ZT350-GK front disc brake main pump assembly (φ14)
1
4
1250205-085000 GB70.1M6×70 (stainless steel)
1
5
1134300-021000 ZT310T-M balance block(Counterweight)
1
6
1244100-042000 ZT250-R right handle bar rubber sleeve
1
8
1250205-031091 GB70.1M6×30(stainless steel)
2
7
1184200-145000 ZT310-X Second Generation Right Handlebar Switch
(TFT)
1
Fig.6 FRONT FORK
COMPONENT
Right handlebar component (new model)
PROCEDURE:
●
Remove the right rear-view mirror
Tighten the rearview mirror rod in one hand, remove the nut with the other hand with 14#sleeves
④
, remove
the small pads
③
, spring
②
and large pads
①
.Take the rearview mirror
⑴
from the front disc brake main pump.
●
Hand guard
Rightly remove the bolt of the rubber sleeve and balance block with a 5#hexagonal, and then remove the
balance block and right hand.
●
Right hand handle auxiliary switch
Fix the main pump of the front disc brake in the right hand, and remove the bolt
⑺
with the other hand with
5#inner hexagonal tools.Find the connection of the wire plug of the auxiliary switching
⑹
and remove it.
CAUTION:
●
The vehicle level should be fixed and checked before checking.
●
Check whether the liquid surface of the brake liquid should be between the "Observation Window 3/4".
●
It is strictly forbidden to rinse the oil cup with high pressure water.
●
The small pads of the rearview mirror need to align the cut slot on the rear visual mirror bolt.
●
The right hand holds the switch to refer to the operation of the throttle line.
●
The seams between the main pump and the auxiliary switch shall be aligned with the triangle on the right
hand.
ZT350-X second generation right handle switch (dark
gray TFT-750)
1
1184300-018000
3
