Zontes ZT310M 2022, Maintenance Manual

Page: 29 / 88

Tension bar removal
1. As shown in the figure, remove the fixing bolt of the tensioner with a 5# inner hexagon, and remove the tensioning
bar.
Check
1. Check whether the tensioning strip is excessively worn or damaged.
Tension strip installation
1. As shown in the figure, the fixing bolts of the tensioning strip are coated with thread glue and installed to the
corresponding position of the box body, and the bolts are tightened with a fixed torque. The torque is 12±1.5 N•m.
Nine, tensioner
Tensioner removal
1. As shown in the figure, use T-rod-8# to remove the top bolts and copper pads of the tensioner, then loosen the
tensioner evenly diagonally to fix bolts, and remove the tensioner and tensioner pads.
Tension bar