10-REAR COVER COMPONENT
67
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1250205-040095 GB70.1 inner hex bolt M8×16(color Zinc)
4
2
1274100-101021 ZT250
－
R electric component box mounting board
1
3
1184200-053000 ZT310PKE external single antenna
1
FIG.5 REAR COVER
COMPONENT
Electrical device box component 1
PROCEDURE:
●
Electrical device box component
Locate the PKE external antenna
⑶
cable connector on the left side of the vehicle
③
Grasp the electrical component box mounting plate
⑵
with one hand, and remove the bolt
⑴
with the other
hand
Hold the rear part of the electrical component box assembly with one hand, grasp the front part and pull down
with the other hand. Unplug the cable connectors
①
and
②
of PKE, and remove the electrical device box
assembly.
CAUTION:
●
Do not pull the cable directly when unplugging it.
●
If you need to replace the PKE fuse, you can directly replace the lower cover of the electrical device box to
replace it.
●
For the disassembly and assembly of the PKE long antenna, refer to the previous "fuel tank left and right cover
components" and the short antenna refer to the "tail skirt and tail light components".
●
When reassembling the connector
②
, first check whether the metal contact piece inside is bent, and straighten
it if necessary. Make sure that all cable connectors are installed in place, otherwise it may cause poor contact and
cause malfunctions.
ZT310 PKE Controller
（
bracelet edition)
ZT310 PKE Controller
（
single antenna
）
