4-REAR FORKLIFT COMPONENT
25
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1100100-092000 Rear disk brake shoe (HS10)
1
After sales
FIG.10 REAR FORKLIFT
COMPONENT
Change rear brake arresters
PROCEDURE:
●
Get rid of brake shoe
Remove the nut with a screwdriver
①
.
Remove the pin shaft
②
with the inner hexagon tool.
Use the sleeve to remove the sliding shaft
③
.
Remove the rear disc brake
⑴
.
●
Replace brake shoe
Push the clamp piston to the end of the arrow, as shown in the lower left corner. In order to reduce the
resistance, the cross bolts on the main pump oil cup can be removed before removing the upper cover and sealing
rubber pad. After all, you should recover in time.
Replace the new disc brake disc, the brake disc must be stuck to the card slot, as shown in the lower right
corner.
Lock the pin shaft
②
with the inner hexagon tool.
Use the sleeve to lock the sliding shaft
③
.
Lock the nut
①
with a screwdriver.
Repeatedly step on the brake pedal until the braking force is restored.
CAUTION:
●
Check the brake disc and brake disc on a regular basis.
●
It is suggested that the qualified maintenance unit should replace the brake disc in pairs.
●
Please refer to the "pedal, shift lever assembly" for adjusting the height of the brake pedal to the appropriate
position after replacement.
●
After replacing the brake disc, it should be about 300 km to be fully integrated to achieve the best braking
effect. Adequate braking distance should be set aside during grinding.
