ZONEMASTER MAXIPOINT V2 DAMPER CONTROL SYSTEM
- Installation Manual
3
3) Components
3.1
Wall Controller (Touchpad)
Users can input control commands from
the wall controller to turn a group on or off.
It is used to input all the program parameters.
The LCD on the wall controller displays clock,
zone status and temperature.
3.2
Main Control Module and its
Extension Module
Main control module (8 zones with bypass
port) and its optional extension module
(extra 8 zones) control the position of
motorized damper of each zone.
3.3 Motorized Damper (Bright Green)
Motorized damper drives the blade of the
damper to turn on/off the air supply.
3.4 Cables
Cables with left latch or central latch
plugs connect the main control module, its
extension module, touchpads and motorized
damper together.
3.5 Supply Air Sensor
Supply air sensor measures the temperature
of the supply air for safety purposes.
3.6
Power Supply
24VAC transformers provide power to the
main control module and extension module.
3.7
Rechargable Battery
The backup battery is used to store the time
when there is a power surge. It is recommended
to install the battery after power is on. Otherwise
the system may not be initialised properly due
to the low voltage of the new battery.
