Zonair3D AIR PRO 500, User Manual

Page: 13 / 30

13
AIR PRO 500-800-1200
maintenance
5.5.1 HORIZONTAL POSITION
5.5.1.1 SUSPENDED
For ceiling mounting, you must:
· Assemble the 8 brackets together with their screws in the 8 corners of the equipment
supplied with the product.
· The upper brackets will act as interns for the braces and the lower brackets as a
grip and suspension of the equipment, the assembly of an anti-vibration system is
recommended.
· No obstacle should prevent or reduce the passage of air both in the suction and in the
impulsion.
5.5.1.2 BENCH/FLOOR MOUNTED
For floor mounting, you must:
· Assemble the 4 brackets together with their screws in the 4 corners of the bench
support equipment. These brackets will NOT be used to join them to any type of anti-
vibration system.
· The classic bench system is based on a support structure for the equipment (which
can be joined with the brackets mentioned in the previous point) and said structure will
be isolated from the supporting ground by means of an anti-vibration system, as shown
in the attached diagram .
· No obstacle should prevent or reduce the passage of air both in the suction and in the
impulsion.
OK
CEILING MOUNTED
maintenance
Air
flow
Air
flow
registro
maintenance
maintenance