14
Dazon bv
9 Connections on the PCB (printed circuit board)
On the PCB 4 inputs are provided. Ex factory 2 are used.
Extra In Gas valve Ignition Power in, 12V
Power in, is used for the connection of a 12V battery. The Ignition is not used
for the MT08, it is meant for the Zon EL08. To the Valve the magnetic valve,
that controls the flow of gas, is connected.
The extra IN input, is an auxiliary input meant for the connection of optional
equipment, like a wired or wireless remote control. When equipment is con-
nected to the + and – of this input and short-circuits these, the control-unit will
immediately begin to operate the gas cannon and let it produce the configu-
red number of shots, regardless of the periods of operation being set.
In case the control-unit should operate the gas cannon only on commands
received through the extra IN input, it is necessary to configure at least one
of the periods, in which the control-unit is allowed to operate the gas cannon.
Set the starting-time and ending-time at exactly the same time, for instance
starting-time 08:00 and ending-time 08:00 as well.
