back
set
(
60 or 70 mm
)
(
35 mm to 50 mm)
A
A
B
B
C
D
1"
(25 mm)
1
Prepare the door and check dimensions
Measure to confirm that the hole in the door
is 2-1/8" (54 mm)
If any parts are missing or damaged, please contact us on Amazon.
Measure to confirm that the backset is
either 2-3/8" or 2-3/4" (60 or 70 mm)
Measure to confirm that the the hole in
the door edge is 1" (25 mm)
Measure to confirm that the door is 1-3/8"
to 2" (35 mm or 50 mm)thick
2
Install the latch and strike
B
A
Is the door edge chiseled?
Is the slotted hole centered in the door hole?
Hold the latch in front of the door hole, with
the latch face flush against the door edge
YES
YES
NO
NO
Install latch in door with
Make sure
the UP icon
goes up.
supplied screws.
No adjustment is
required. Proceed
to next step.
Slotted hole is centered.
slotted hole is NOT centered.
Rotate and pull the
latch as shown
to extend latch.
chiseled
not
chiseled
I
or
or
1 / 6
Use a flathead screwdriver to remove
Rectangular face from latch and install
drive-in collar.
2-3/8" or 2-3/4"
1-3/8" to 2"
(54 mm)
2-1/8"
1
φ
2-3/4”
(70mm)
2
1
2
3
4
C
IMPORTANT: Make sure hole in door frame
is drilled a minimum of 1" (25 mm) deep.
H
C
Install strike on the door frame
Install latch in door with wood
block and hammer.
Installation Guide
Latch
Exterior Assembly
Battery Cover
Strike
A
E
F
G
B
C
D
Parts List
Drive-In Collar
(Optional)
Strike(H) and
Latch(I) Screws
Mounting Plate
Interior
Assembly
H
×2
I
×2
K
×3
Interior Assembly
Screws
L
×1
Backup Key
M
×1
Reset Tool
Mounting Plate
Screws
J
×2
Latch
Screws
Strike
Screws
Mounting Plate
Screws
Strike
Interior Assembly
Screws
Mounting
Plate
Battery
Cover
Interior
Assembly
Exterior
Assembly
Backup Key
Latch
TOOL REQUIRED:
USE OF A POWERED SECREWDRIVER IS
NOT RECOMMENDED
With the door closed, use a flat-head screwdriver to
test if deadbolt works smoothly.
Check alignment between the latch and the strike,
making sure when the deadbolt is extended, it is
going into the bolt hole and not hitting the deadbolt
strike or door frame.
D
Use a screwdirver to test if deadbolt works smoothy.
