ZOLL X Series, Operator'S Manual

Page: 253 / 344

Transferring Data to a USB Device
9650-001355-01 Rev. M X Series Operator’s Guide 21-5
Clearing the Log
You should clear the full disclosure log after transferring data to the USB device or when the
log is nearing its capacity.
Note: Clearing the log during patient treatment results in the loss of all patient data and
events recorded prior to clearing the log.
To clear the log:
1. Press .
2.
Press .
3.
Press the Clear Log quick access key ( ).
3. Use the navigation keys to select Yes .
Note: An UNABLE TO READ LOG message indicates that the log contains no information.
This message can occur if you clear the log and then immediately enter the Treatment
screen or the Trend Summary screen.
LOG