ZOLL Base PowerCharger 1x1, Operator'S Manual

Page: 21 / 26

17
Section 5
EMC Specifications
*XLGDQFHDQG0DQXIDFWXUHU¶V'HFODUDWLRQ(OHFWURPDJQHWLF(PLVVLRQV
The ZOLL Base PowerCharger 1x1 is intended for use in the electromagnetic environment specified below. The customer or
the user of the ZOLL Base PowerCharger 1x1 should ensure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions CISPR11 Group 1
The ZOLL Base PowerCharger 1x1 uses RF energy
only for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF emissions CISPR 11 Class B
Harmonic Emission
IEC 61000 3-2 Not applicable
Voltage Fluctuations/Flicker Emission
IEC 61000 3-3 Not applicable
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service
according to EMC information provided in this document.