background image

iv

ZOLL AED 3 Administrator’s Guide

9650-000752-01 Rev. D

Appendix C

—Contains definitions of all configuration settings for the

ZOLL AED 3 defibrillator and provides instructions for setting up your wireless 
configuration.

Conventions

Throughout this document, text prompts and voice prompts are indicated by 
capital italicized letters, such as 

CALL FOR HELP

.

NOTE

Notes contain important additional information on using the 

defibrillator.

ZOLL AED 3 Safety Considerations

Only qualified personnel should service an ZOLL AED 3 defibrillator. Before using 
this defibrillator, read the 

ZOLL AED 3 Operator’s Manual

. Before servicing any 

equipment, review these safety considerations and read this manual carefully.

Before discharging the defibrillator, warn everyone near the equipment to 

STAND CLEAR

.

Do not recharge, disassemble, or dispose of the battery in fire. The battery 
might explode if mishandled.

Tracking Requirements

U.S Federal Law (21 CFR 821) requires the tracking of defibrillators. As an owner 
of this defibrillator, you have the responsibility under this law to notify ZOLL 
Medical Corporation if this product has been received, lost, stolen or destroyed 
or has been donated, resold or otherwise distributed to a different organization.
If any of the events described above occur, please contact ZOLL Medical 
Corporation in writing with the following information:
1. Originator’s organization - Company Name, Address, Contact Name and 
Contact Phone Number.
2. Part Number/Model Number and Serial Number.
3. Disposition of Device (e.g. received, lost, stolen destroyed, distributed to 
another organization).
4. New Location and/or Organization (if different from #1 above) - Company 
Name, Address, Contact Name and Contact Phone number.
5. Date change took effect.

WARNING! Warning statements describe conditions or actions that 

can result in personal injury or death.

CAUTION Caution statements describe conditions or actions that can result 

in damage to the defibrillator.

WARNING! The ZOLL AED 3 defibrillator can generate as much as 

2250 volts with sufficient current to cause lethal shocks.

       

 

Summary of Contents for AED 3









































































Reviews: