17
be necessary to drain out all of the water in the system.
1. Allow all of the ice cubes have been ejected from the evaporator of ice maker.
2. Turn off the unit, and unplug the power cord.
3. Shut off the water supply at the main water supply.
4. Disconnect the water supply hose from the water inlet valve.
5. Pull out the Water drain pipe of the water tank indicating “H” in above illustration to
drain out the water in the water tank. When all of the water has been drained out, to
reinstall back the water drain pipe of the water tank.
6. Then drain out all of the water from the water drain port located at unit back indicating
“7”in above illustration.
7. Disconnect the water drain pipe to the main drain pipeline or floor drain, plug on the
drain cap again.
8. Drop the door open to allow for circulation and prevent mold and mildew.
9. Leave water supply hose and power cord disconnected until ready to reuse.
10.Dry the interior & wipe the outside of the unit.
11. Put a plastic bag on the unit to resist out dust & dirty.
9-Product Warranty
1. The warranty only covers defects in material or workmanship.
2. The warranty will not apply in cases of:
- Normal wear and tear.
- Incorrect use, e.g. overloading of the appliance, use of non-approved accessories.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the user manual, e.g. connection to an unsuitable
mains supply or non-compliance with the installation instructions.
- Partially or completely dismantled appliances.
