background image

CV-TYQ_0120_E_20180329

20

VE HYBRID ELECTRIC

DISPENSING POT

SGP

HKG

CV-TYQ40

B

C

A

WARNING - THIS APPLIANCE MUST BE EARTHED

How to change the Fuse

If the Power Plug of your Power Cord (See P.4) is,

A. A type that can be disassembled. Refer to above.

B. A solid molded type that can not be disassembled. Please refer to the following.

1. Open the Fuse Cover of the Power Plug.

2. Replace the Fuse (13A) that is inside with a new Fuse. (Be sure to replace 

with a 13A Fuse)

3. Fit back the Fuse Cover with the new Fuse to the Power Plug.

Do not connect the Fuse directly to the Power Plug. The Fuse 

Cover can not be attached.

GREEN AND YELLOW

13 AMP FUSE

BROWN

BLUE

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow:Earth          Brown:Live          Blue:Neutral

If the colours of the wires in the mains lead of this appliance do not correspond with the coloured markings identifying 

the terminals in your plug, proceed as follows.

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the 

letter E or by the earth symbol or coloured green or green-and-yellow. The wire which is coloured blue must be 

connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured brown must be connected to the terminal which is 

marked with the letter L or coloured RED.

This appliance must be protected by a 13A fuse if a 13A (BS1363) plug is used 

or, if any other type of plug is used, by a 10A fuse either in the plug or adaptor 

or at the distribution board.

Caution

Power Plug

Fuse Cover

Fuse 

(13A)

Fuse Cover

Always follow basic safety precautions when using electrical appliances. 

Read all instructions carefully. 

Please keep this instruction book on hand for easy reference.

INDEX

BOIL MODE

DISPENSE HOT WATER

DISPOSE WATER

AUTOMATIC SHUT-OFF FUNCTION

REBOIL MODE

HOW TO SET THE KEEP WARM MODE

QUICK TEMP MODE

ENERGY-SAVING MODE

ENERGY-SAVING TIMER FUNCTION

CAFÉ DRIP FUNCTION

HOW TO CHANGE THE INFORMATION 

SOUND

6
8
8
9
9

10
12
13
13
14

14

IMPORTANT SAFEGUARDS

PARTS NAMES AND FUNCTIONS

2
4

HOW TO USE

BEFORE USE

USEFUL FUNCTIONS:

The average Keep Warm electric power consumption is for one hour, provided that the Inner 

Container is full and the room temperature is approximately 23

C.

The height refers to the product when the handle is down.

In high altitudes or severely cold areas, the product may not perform as specified. Avoid using the 

product in such areas or in other extreme conditions.

This product is not suitable for use in countries or regions with different power supply voltages or 

frequencies.

SPECIFICATIONS

CD-TYQ40

AC 220-230V  50/60Hz

640-700W

0.75 m

Approx. 

24

 

W

Approx. 

21

 

W

Approx. 

17

 

W

Approx. 

13

 

W

4.0 liters

98

C

90

C

80

C

70

C

Model No.

Capacity

Rating

Electric Consumption

Length of the Power Cord

Weight (including the Power Cord)

External Dimensions (approx. cm)

Average Power 

Consumption 

during Keep 

Warm

21 (W) x 28.5 (D) x 35 (H)

Approx. 

3.2 kg

Q&A ON PRODUCT USE

TROUBLESHOOTING GUIDE

SPECIFICATIONS

CLEANING AND MAINTENANCE

BEFORE CALLING FOR SERVICE

17
17
20

CLEANING AND MAINTENANCE 

HOW TO REPLACE THE 

INNER LID GASKET

15

15

REPLACEMENT PARTS

17

16

HOW TO CLEAN THE INNER 

CONTAINER WITH CITRIC ACID

Summary of Contents for CV-TYQ40











Reviews: