-14-
手触倒缝装置的用法 (图
18
)
Hand-touch Backstitch Device(Fig. 18)
1
5
1.倒缝按钮的使用方法
1）缝纫时按下倒缝按钮①，立即开始倒缝。
2）仅在按下的时间里进行倒缝。
3）手松开后立即变为正向缝纫。
2.补针按键的使用方法
按一下补针按钮②缝纫机则作往前补半针，
一直按着缝纫机则作连续往前补针。
注意：补针按钮②可在连续回缝除外，任何
一种车缝中途停止时使用(未切线时)。
3.
1
/
N
按键的使用方法
在高级参数界面→机头开关设置→设置手动
开关
C
的功能，输入数值
X
，该按键③即为补一针
1
/
X
针距。
1.Use of back sewing push-button
1) Push the backstitch switching push-butt
-on ①
to allow the sewing machine to start ba
-
ckstitch immediately.
Backstitch is implemented only while the
2)
push-button is held down.
It is changed to forward stitch once the pu
3)
-
sh-button is released.
2.Use of reinforce sewing
Press the reinforce sewing button
② one ti
-
me, the sewing machine reinforce forth with
half stitch, press all the time, it continues sew
-
ing with forth reinforce.
Caution:in addition to continue back reinfor
-
ce sewing,the reinforce sewing boutton can
be as stop button
② during any sewing condit
-
ion.(before trimming)
3
.Useofthe
1
/
N sewing
The illuminating lamp goes on at full bright
-
ness once the machine is powered on. Push
illuminating lamp control button
③ to reduce in
sequence the brightness till turn off.
图
19
Fig.
19
D
C
B
A
E
图
18
Fig.
18
①
②
③
④
4
.照明灯控制按钮的使用方法
开机后照明灯会全亮度打开，按动照明灯控
制按钮④，灯的亮度会依次减弱，直至关闭，
依次循环。
4
.Use of the light
push
-
button
The illuminating lamp goes on at full bright
-ness once the machine is powered on. Push
illuminating lamp control button ④ to reduce in
sequence the brightness till turn off.
