9
1
）
Press Ready Key and step the front part of
pedal
to lower the presser
；
2
）
Step the front part of pedal
again to
start sewing
；
3
）
During sewing, if user needs to stop
machine immediately, user can step the
back part of the pedal
to stop machine.
If user needs to continue sewing, he just
needs to step the back part again
.
2.2.8 Bottom Thread Counter
The counters are set as Production Counter (Adding method) at the time of delivery. However,
if it is used as the Bottom Thread Counter (subtracting method), the value of parameter No.18
shall be set at 1.
2.2.9 Pause
1. Pedal Stop Function: The new pedal has three levels: Level 1 for lowering presser; Level 2 for
normal sewing; Level 3 for emergency stop
.
1
）
Press
to select
.
2
）
Then press
.
3
）
After that, press
&
to set
number of times that can be sewn with a
bobbin.
4
）
Finish of sewing in each time will cause the
counter to count down by one.
5
）
After the machine finishes the set times of
sewing, the monitor will shine for hinting the
user.
6
）
Replace the bottom thread and press
again. Then the value of counter will restore
to the set value
7
）
Repeat the steps from 4) to 6).