16
© 2020. All rights reserved.
2. Check the controller. The system light should be
green when the unit is plugged into a 115V outlet.
3. NOTE: When the unit is first plugged in, all lights
will flash and an alarm will sound to verify proper
operation. The charger may not begin charging for
several minutes. When the battery begins charging,
the four lights in the circle will turn blue, with the
battery light flashing blue.
SILENCE
TEST
by
FW2065 A
P L U S
AC
POWER
FLOAT
STATUS
BATTERY
DC
PUMP
24/7 BASEMENT
PROTECTION
USB
RESET
FLOAT
DC
PUMP
FUSE
30 AMP
1-800-584-8089
BasementSentry.com
DC POWER
+ 15V DC 1.6A
Flashing blue light
when charging
Solid blue light
when charging
3
AC
POWER
FLOAT
STATUS
BATTERY
DC
PUMP
SILENCE
TEST
24/7 BASEMENT
PROTECTION
USB
RESET
FLOAT
DC
PUMP
FUSE
30 AMP
by
FW2065 A
P L U S
1-800-584-8089
BasementSentry.com
DC POWER
+ 15V DC 1.6A
AC
POWER
FLOAT
STATUS
BATTERY
DC
PUMP
24/7 BASEMENT
PROTECTION
USB
RESET
FLOAT
DC
PUMP
FUSE
30 AMP
1-800-584-8089
BasementSentry.com
DC POWER
+ 15V DC 1.6A
All lights
will be
green when
plugged
into 115V
outlet
2
START-UP AND OPERATION
4. Once the battery is fully charged, the four lights will turn
green. To clear any other lights or alarms, press and hold
the ‘Silence’ button for three seconds.
The following LED functions provide a visual cue to the
proper function of the DC pump:
• The DC pump LED will stay yellow after pumping water,
alerting you when the DC pump has turned on and has
pumped water.
• If the the DC pump runs and does not pump water, the
LED will not stay yellow. This can occur during a test of
the system when the float is lifted manually while the
pump is above the water line. This allows the system to
be tested without having to reset it each time.
SILENCE
TEST
by
FW2065 A
P L U S
AC
POWER
FLOAT
STATUS
BATTERY
DC
PUMP
24/7 BASEMENT
PROTECTION
USB
RESET
FLOAT
DC
PUMP
FUSE
30 AMP
1-800-584-8089
BasementSentry.com
DC POWER
+ 15V DC 1.6A
Solid green light
when charged
Press to
silence
alarms
4
