background image

22

© 2020. All rights reserved.

WARRANTY

This product is warranted for three years from the date of purchase. Subject to the conditions hereinafter set 

forth, the manufacturer will repair or replace to the original consumer any portion of the product which proves 

defective due to defective materials or workmanship. To obtain warranty service, contact the dealer from whom 

the product was purchased. The manufacturer retains the sole right and option to determine whether to repair 

or replace defective equipment, parts, or components. Damage due to conditions beyond the control of the 

manufacturer is not covered by this warranty.
THIS WARRANTY WILL NOT APPLY: (a) To defects or malfunctions resulting from failure to properly install, 

operate, or maintain the unit in accordance with printed instructions provided; (b) to failures resulting from 

abuse, accident, or negligence, or use of inappropriate chemicals or additives in the water; (c) to normal 

maintenance services and the parts used in connection with such service; (d) to units which are not installed 

in accordance with normal applicable local codes, ordinances, and good trade practices; and (e) if the unit is 

used for purposes other than for what it was designed and manufactured.
RETURN OF WARRANTED COMPONENTS: Any item to be repaired or replaced under this warranty must be 

returned to the manufacturer at Kendallville, Indiana or such other place as the manufacturer may designate, 

freight prepaid.
THE WARRANTY PROVIDED HEREIN IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND MAY 

NOT BE EXTENDED OR MODIFIED BY ANYONE. ANY IMPLIED WARRANTIES SHALL BE LIMITED TO 

THE PERIOD OF THE LIMITED WARRANTY AND THEREAFTER ALL SUCH IMPLIED WARRANTIES ARE 

DISCLAIMED AND EXCLUDED. THE MANUFACTURER SHALL NOT, UNDER ANY CIRCUMSTANCES, BE 

LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, SUCH AS, BUT NOT LIMITED TO 

DAMAGE TO, OR LOSS OF, OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS, INCONVENIENCE, 

OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY TYPE OR NATURE. THE LIABILITY 

OF THE MANUFACTURER SHALL NOT EXCEED THE PRICE OF THE PRODUCT UPON WHICH SUCH 

LIABILITY IS BASED.

This warranty gives you specifi c legal rights, and you may have other rights which vary from state to 

state. Some states do not allow limitations on duration of implied warranties or exclusion of incidental or 

consequential damages, so the above limitations may not apply to you.

In those instances where damages are incurred as a result of an alleged pump failure, the Homeowner 

must retain possession of the pump for investigation purposes.

Summary of Contents for BASEMENT SENTRY STBC201Q























Reviews: