10
© Copyright 2020 Zoeller
®
Co. All rights reserved.
4. Once the Fit’s Z Control
®
LED is solid, log in to your account (or create one) at zcontrolcloud.com. Choose the Add New Device button
next to the location you want to use for the Fit (see Figure D). Follow the directions to add your Fit by either auto-detect or entering the
Device I.D. When successful, a Fit product tile will appear in your account.
Firmware Updates:
The Fit is capable of OTA, or “over the air” firmware updates. It’s possible that the Fit could perform an update immediately if one is available at
the Z Control
®
Cloud. If an update is taking place, the Z Control
®
LED will flicker for up to 1 minute while the update is downloaded. The Z Control
®
LED will be solid and all other LEDs will turn off while the update is being installed. After up to 1 minute, the Fit will restart and return to normal
operation. The Fit’s alert history on the Z Control
®
Cloud will also be updated with the firmware upgrade information, and nofication to email
accounts will occur.
When you add the correct
Device ID, a Fit product tile
will appear in your account
Select Add New Device
Figure D
Click WiFi Scan button
Available WiFi networks will be listed here. You
may need to scroll down. Select the one you want
FIT to use to connect to the internet. Then fill in the
Passphrase.
** Note that the Fit will not connect to routers with “WEP” or “OPEN” security. Security must be WPA or WPA2 or similar variant.
Figure C
