4
© Copyright 2017 Zoeller
®
Co. All rights reserved.
SEE NOTE
PIPING SHOWN ONLY
FOR CLARITY.
PIPING SHOWN ONLY
FOR CLARITY.
X (102 mm MIN.)
STEP 1
Determine Installation Configuration
NOTE: The basin is designed to be installed directly under the sink (Internal Trap) or on the side (standard).
IMPORTANT! Check local and state codes before using the internal trap option.
1.1) Figure 1.1A and 1.1B are typical configurations for installation of the drain systems. The actual configuration will vary
depending on your cabinet and sink configuration.
NOTE: If installing the internal trap, record the “x” dimension, it will be required in Step 4.
INTERNAL TRAP COMPONENTS SUPPLIED BY OTHERS.
!
Figure 1.1B
STANDARD (EXTERNAL TRAP)
SK2001
Figure 1.1A
INTERNAL TRAP
