5
© Copyright 2017 Zoeller
®
Co. All rights reserved.
STEP 2
Install the Discharge Pipe onto the Pump ( All Models)
Figure 2.1
BE SURE THAT WEEPHOLE
IS NOT DIRECTED TOWARD THE FLOAT!
Water stream will be visible from this hole during
pump run periods.
IMPORTANT!
DISCHARGE PIPE
PUMP DISCHARGE
WEEP HOLE
SK2002
STEP 3
Installation of the Gasket
3.1) Install the gasket into the “gasket seat” at the top of
the basin.
Figure 3.1
SK3160
OVERLAP DETAIL
GASKET SEAT
FOAM GASKET
GASKET SEAT DETAIL
FOAM GASKET
APPROXIMATELY 1/4" OVERLAP
BASIN