5
© Copyright 2005 Zoeller Co. All rights reserved.
STEP
2
Install the Discharge Pipe onto the Pump ( All Models)
Figure 2.1
BE
SURE
THAT
WEEPHOLE
IS NOT DIRECTED TOWARD THE FLOAT!
Water stream will be visible from this hole during
pump run periods.
IMPORTANT!
DISCHARGE PIPE
PUMP DISCHARGE
WEEP HOLE
SK2002
STEP
3
Installation of the Foam Gasket
3.1)
Install the foam gasket into the “gasket seat” at the top of the basin, refer to Figure 3.1 for details.
Figure 3.1
OVERLAP DETAIL
GASKET SEAT
FOAM GASKET
GASKET SEAT DETAIL
FOAM GASKET
APPROXIMATELY 1/4" OVERLAP
BASIN
SK2003