Zodiac Z260iQ, Quick Start Manual

Page: 8 / 168

8
User functions
3 seconds
Unlock the keypad (3 s)
Check that the compressor
is working:
The operating mode icon
displays.
/
Modify the temperature.
The operating mode icone
blinks.
Recommended
temperature: 28 °C
Adjust the temperature setpoint
Press twice.
flashes.
-->
Press the arrow button to
set time, then SET to set
the hours.
/
Press to change.
Press to validate. Push SET
again and do the same for
minutes.
Press for 1 second to confirm.
Setting the time (clock)
Lock/Unlock
the keypad
❷ Use
Refer to the online manual for
further details about operating
modes.
4
The heat pump has 3 active operating
modes for adjusting its operating
speed to the power that is required
and the mode that is selected:
• ‘‘BOOST’’ mode
• ‘‘SMART’’ mode
• ‘‘ECOSILENCE’’ mode
• ‘‘AUTO’’ mod
Unlock the keypad (3 s). Then
press SET.
The icon displays.
Navigate through the
available modes.
Press to select.
Press 2 s to start.
Select an operating mode
Unlock the keypad (3 s).
Press 2 s. The heat pump’s
compressor will stop after
few minutes
- 24 -
Deforsting
Set temperature
Water temperature
REGULATION (ELECTRONIC CONTROLLER)
Start-up and Locking
Press 3s to unlock the control box.
Press 2s to turn the heat pump on or off. This button is also used to return to the main interface.
The lock activates automatically after 60 seconds of inactivity). When the cabinet is locked, the logo appears.
Operating Modes
Press the button to change the operating mode:
Then press to change the operating mode press
again to validate the change and return to the main
menu.
ECOHeatingmode: Choosethisheatingmodesothat
theheatpumpoperatessilently.
SMARTHeatingmode:
Choosethisheatingmodefor
theheatpumptooperateina conventional manner
BOOSTheatingmode: Choosethisheatingmodeso
thattheheat pumpquicklyheats thewater inyour pool.
Automode: Theheatpumpintelligentlychooses themost
appropriateoperatingmodeaccordingtothesetpointtemperature.
S ILENTCoolingmode:
Choose thiscoolingmodefor
theheatpumptooperatesilently.
ECOCoolingmode: Choosethiscoolingmodesothat
theheatpumpoperatesina conventionalmanner.
BOOSTCoolingmode: Choosethiscoolingmodefor
theheatpumpto operateina classic way.
Setting the required temperature
Step 1: Go to the main menu
by unlocking the control panel.
Step 2: Press the and
buttons to change the set
temperature.
Clock setting
Step 1: Go to the main menu
by unlocking the control panel.
Step 2: Press 2 times to
enter the clock setting interface.
The clock display flashes.
Step 3: Press to switch from
hours to minutes and validate by
pressing .
Step 4:
Change hours/minutes by using and .
Step 5: Press the button 1s to confirm the setting
and return to the main menu.
The icon disappears when
the compressor is not
working.
Press 2 s to restart the
compressor.
Deactivate the heat pump