![background image](http://html1.mh-extra.com/html/zodiac/w197515/w197515_instructions-for-installation-and-use-manual_936329004.webp)
H0493700.A - EN - 2014-07
3
1. Information before installing
1.1 General delivery terms and conditions
All equipment, even postage and packing paid, travels at the risks and perils of the recipient. If damaged caused during
transport is observed, the recipient should write appropriate comments on the delivery note provided by the carrier (and
confirmed in writing to the carrier by registered letter).
1.2 Contents
1.2.1 pH Link module
pH Link
module
POD kit
pH sensor
Buffer solution pH 7.5
Accessory bag (counter securing clip,
PTFE tape and stoppers)
s injection hose
(5 meters)
Hole saw, 22 mm
1.2.2 Dual Link module
Dual Link module
POD kit
pH sensor
ACL sensor
Hole saw, 22 mm
Accessory bag (counter securing clip, PTFE
tape and stoppers)
s injection
hose (5 meters)
Buffer solution
pH 7.5
Buffer solution
700 mV
1.3 Technical specifications
pH Link module
Dual Link module
Supply voltage
Low voltage (connected to the power pack)
Peristaltic pump flow rate
1.8 L/h
Maximum back pressure (injection)
1.5 bar
pH and ACL sensor type
combined, ABS 1/2’’ NPT threaded body (pH = blue / ACL = red)
pH and ACL sensor electrolyte
KCI polymer
pH and ACL sensor cable(s)
1.5 meters shielded, BNC plug (pH = blue / ACL = red)
pH correction
acid (pH minus only)