background image

10

  

 3.5 I  Starti ng the cleaning cycle

To prevent risk of injury or property damage, be sure to adhere to the following:
•  Bathing is prohibited when the appliance is in the pool.
•  Do not use the appliance during shock chlorinati on.
•  Do not leave the appliance unatt ended for an extended period.
•  Do not use the appliance if the roller shutt er is closed.

• 

When the control box is powered up, the following symbols light up to indicate:

 -

The acti on in progress

 - The cleaning mode selected

 - Maintenance required 

• 

The control box switches to standby aft er 10 minutes and the screen is switched off . Press any key to exit standby 

mode. Standby mode does not stop the appliance if it is in a cleaning cycle.

 3.5.1 Cleaning cycle selecti on (depending on model)

• 

A cleaning cycle is already confi gured by default: the symbols are on and the cleaning ti me appears on the screen, for 

example: 

 (depending on the model).

• 

The cleaning cycle can be selected at any ti me, before the appliance starts or while it is operati ng. The new cycle will 

be launched instantly and the remaining ti me countdown will be reiniti alised.

• 

The cleaner adapts its movement strategy depending on the choice in order to opti mise the coverage rate.

Surface to clean 

Pool shape

Cleaning intensity

 Bott om only

 Other shapes, other bott oms

 Low intensity

 

 Bott om + sides + water line

 Flat bott omed rectangular

 Intensive

 Waterline only

3.5.2 Launching the cleaning cycle

•  Press 

Tip to improve cleaning performance

At the start of the bathing season, launch several cleaning cycles in bott om-only mode (aft er removing large 

debris with a net).

Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean 

and the fi lter less clogged.

3.5.3 Adjusti ng the cleaning ti me (depending on model)

• 

You may reduce or increase the ti me for the cleaning cycle selected or in progress:

 

-

 :

 Reduce by 30 minutes. 

 

-

 : 

Increase by 30 minutes.

•  Press 

 to confi rm. 

EN

Summary of Contents for Vortex OV 3300
























Reviews: