![background image](http://html2.mh-extra.com/html/zodiac/vortex-ov-3300/vortex-ov-3300_instructions-for-installation-and-use_4008554018.webp)
17
4.3 I Replacing the brushes
•
Each brush is equipped with wear indicators; the distance between the indicators and the end of the brush indicates
whether the brush is in good conditi on (see
image
)
.
• The brushes are worn and should be replaced when the wear indicators appear as shown in image .
•
To remove worn brushes, remove the tabs from the holes in which they are fi xed (see
image
)
.
•
To fi t new brushes, start by fi tti ng the side without tabs under the brush holder (see
image
)
.
•
Roll the brush around its support, slide the tabs into the att achment holes and pull on the end of each tab unti l its
edge passes through the slit (see
image
)
.
•
Cut the tabs using a pair of scissors for them to be level with the other blades (see
image
)
.
Summary of Contents for Vortex OV 3300
Page 19: ...18 4 4 I Changing the tyres EN...