background image

1

 WARNINGS

GENERAL WARNINGS

•  Failure to respect the warnings may cause serious damage to the pool equipment or cause serious injury, even death.

•  The appliance is intended to be used with pools for a specifi c purpose; it must not be used for any purpose other than that for which it was 

designed.

•  It is important that the appliance is operated by people who are competent and qualifi ed (both physically and mentally), aft er having read the 

instructi ons for use. All persons not meeti ng these criteria must not approach the appliance in order to avoid exposure to dangerous elements.

•  Keep the appliance out of the reach of children.

•  The appliance must be installed according to the manufacturer’s instructi ons and in compliance with local standards. The installer is responsible 

for installing the appliance and for compliance with nati onal installati on regulati ons. Under no circumstances may the manufacturer be held 

liable in the event of failure to comply with applicable local installati on standards.

•  For any work other than the simple maintenance described in this manual, the product should be referred to a qualifi ed professional.
•  Incorrect installati on and/or use may cause serious damage to property or serious injuries (possibly causing death). 

•  All equipment, even postage and packing paid, travels at the risks and perils of the recipient. The latt er shall issue reserves in writi ng on the 

carrier's delivery slip if damage is detected, caused during transport (confi rmati on to be sent to the carrier within 48 hours by registered lett er). 

In the event that an appliance containing coolant has been turned on its side, menti on your reservati ons in writi ng to the carrier.

•  If the appliance suff ers a malfuncti on, do not try to repair the appliance yourself, instead contact a qualifi ed technician.

•  If the power cord is damaged, it must be replaced by the manufacturer, its maintenance technician or any other qualifi ed person so as to prevent 

all risks.

•  Refer to the warranty conditi ons for details of the permitt ed water balance values for operati ng the appliance.

•  Deacti vati ng,  eliminati ng  or  by-passing  any  of  the  safety  mechanisms  integrated  into  the  appliance  shall  automati cally  void  the  warranty, 

in additi on to the use of spare parts manufactured by unauthorised third-party manufacturers.

•  Do not spray insecti cide or any other chemical (infl ammable or non-infl ammable) in the directi on of the appliance, as this may damage the body 

and cause a fi re.

•  Zodiac® heat pump, fi ltrati on pump and fi lter appliances are compati ble with the most commonly used types of pool water treatment systems.

•  For heat pump appliances or dehumidifi ers, do not touch the fan or insert a rod or your fi ngers through the grid when the appliance is in 

operati on. The fan rotates at high speed and may cause serious injuries or even death.

WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES

•  The power supply to the appliance must be protected by a dedicated 30 mA residual current device, complying with the standards and regulati ons 

in force in the country in which it is installed.

•  Before carrying out any operati ons, check that:

•  The voltage indicated on the appliance informati on plate corresponds to the mains voltage. 

•  The power grid is adapted to the power requirements of the appliance, and is grounded. 

•  The plug (where applicable) is suitable for the socket.

•  In the event of abnormal operati on or the release of odours from the appliance, turn it off  immediately, unplug it from its power supply and 

contact a professional.

•  Before any interventi on on the appliance, ensure that the latt er is switched off  and disconnected from the power supply, in additi on to any other 

equipment connected to the appliance, and that the heati ng priority (where applicable) is deacti vated.

•  Do not disconnect and reconnect the appliance to the power supply when in operati on.

•  Do not pull on the power cord to disconnect it from the power supply.

•  Do not handle the electrical elements with wet hands.

•  Clean the terminal board or the power supply socket before connecti on.

•  For any component or sub-assembly containing a batt ery: do not recharge or dismantle the batt ery, or throw it into a fi re. Do not expose it to 

high temperatures or direct sunlight.

•  In stormy weather, unplug the appliance to prevent it from suff ering lightning damage.

•  Do not immerse the appliance in water (with the excepti on of cleaners) or mud.

SPECIFIC FEATURES APPLICABLE TO "Pool cleaners"

•  The cleaner must operate in pool water with a temperature of between 15°C and 35°C.

•  To avoid possible injury or damage to the cleaner, do not operate the cleaner out of the water.

•  In order to prevent possible injury, bathing is prohibited when your cleaner is in the pool.

•  Do not use the cleaner during shock chlorinati on.

•  Do not leave the cleaner unatt ended for an extended period.

WARNING ON THE USE OF A CLEANER IN A POOL WITH A VINYL SURFACE: 

•  Before installing your new cleaner, carefully inspect the lining of your pool. If the liner has eroded in some areas, or if you noti ce gravel, folds, 

roots or corrosion caused by metal beneath the liner, or if you noti ce that the surface (bott om and walls) is damaged, do not install the cleaner 

before performing the necessary repairs or before having the liner replaced by a qualifi ed professional. The manufacturer may not be held liable 

in any way for damage caused to the liner.

•  The surface of certain vinyl patt erned surfaces can wear rapidly and the patt erns disappear on contact from objects such as cleaning brushes, 

toys, infl atable buoys, chlorine distributors and automati c pool cleaners. The decorati on on some vinyl surfaces can be scratched or worn by basic 

fricti on such as through the use of a pool brush. The colours of certain patt erns can also be erased during use or when in contact with objects 

in the pool. The manufacturer may not be held liable for the erased patt erns, wear or scratching of vinyl surfaces, which are not covered by the 

limited warranty.

Recycling

This symbol means that your appliance must not be thrown into a normal bin. It will be selecti vely collected for the purpose of 

reuse, recycling or transformati on. If it contains any substances that may be harmful to the environment, these will be eliminated 

or neutralised.

Contact your retailer for recycling informati on.

EN

Summary of Contents for TornaX



















Reviews: