![background image](http://html2.mh-extra.com/html/zodiac/tornax/tornax_instructions-for-installation-and-use_3951402014.webp)
12
4.3 I Replacing the brush
• The brush is equipped with wear indicators; the distance between the indicators and the end of the brush indicates
whether the brush is in good conditi on (see image )
.
• The brush is worn and should be replaced when the wear indicators appear as shown in image
.
• To remove the worn brush, remove the tabs from the holes in which they are fi xed (see image )
.
• To fi t the new brush, start by fi tti ng the side without tabs under the brush holder (see image )
.
• Roll the brush around its support, slide the tabs into the att achment holes and pull on the end of each tab unti l its
edge passes through the slit (see image ).
• Cut the tabs using a pair of scissors for them to be below fl ap level (see image )
.
Summary of Contents for TornaX
Page 2: ...Notes...