![background image](http://html1.mh-extra.com/html/zodiac/rv-5480-iq/rv-5480-iq_instructions-for-installation-and-use-manual_4025150048.webp)
22
6.2 I Error codes
Control Unit
Display
In-App Display
Suggested Soluti on
Er : 0
1
Er : 0
2
Er : 03
Pump Motor
Tracti on Motor Right
Tracti on Motor Left
•
Check for any small debris or cable impeding the brushes from turning
freely.
•
Check for corrosion or bent pins in the power cable connecti on area.
•
Turn each wheel one quarter turn in one directi on repeatedly unti l
rotati on is smooth.
•
Repeat, turning wheels in the opposite directi on unti l rotati on is smooth.
•
If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
Er : 0
4
Pump Mo
tor Consumpti on
•
Check for small debris or hair in fan impeller.
•
Thoroughly clean fi lter canister.
•
If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
Er : 05
Er : 0
6
Drive Motor
Consumpti on
Right
Drive Motor
Consumpti on Left
•
Check for any small debris or cable impeding the brushes from turning
freely.
•
Check for corrosion or bent pins in the power cable connecti on area.
•
Turn each wheel one quarter turn in one directi on repeatedly unti l
rotati on is smooth.
•
Repeat, turning wheels in the opposite directi on unti l rotati on is smooth.
•
If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
Er : 07
Er : 0
8
Cleaner Out of the
Water
•
Turn off the cleaner and submerge.
•
Thoroughly clean the fi lter canister.
•
Shake to release air bubbles.
•
Restart cycle.
•
If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
N/A
N/A
•
"The cleaner did not fi nish its cycle correctly.
•
Restart a cleaning cycle"
Er :
10
Communicati on
•
Turn cleaner power off and on again to reset.
•
Check fl oati ng cable connecti on to control box.
•
Check for corrosion or bent pins at connecti on point.
•
If this does not solve your problem, please contact your local retailer for
a diagnosti c review or call customer service.
N/A
Connecti on Error
•
Check the status of the LAN/WEB LEDs on the control box and follow the
steps described in the table "6.3 I Troubleshooti ng the connecti on to the
iAquaLink™ app".
N/A
A red dot appears in
the "My appliances"
list
•
"Appliance not plugged in or not connected to the home Wi-Fi network.
If the dot is red when the control box is plugged in and if the LAN and
WEB icons are lit up, refresh the screen (by swiping downwards).
•
If the dot turns green: the appliance is ready for use."
If the problem persists, contact your retailer:
Dismissing an Error Code
From the Control Unit:
•
Aft er you have completed the troubleshooti ng soluti on steps, press any key (except the phone icon) to clear the error
code.
•
If the control unit is in Standby Mode, press the Start/Stop butt on to show the on-screen display. Aft er you have
completed the troubleshooti ng soluti on steps, press any key (except the phone icon) to clear the error code.
From the iAquaLink™ App:
•
Press the error icon to display troubleshooti ng soluti ons. Aft er you have completed the troubleshooti ng soluti on
steps, press
Clear Error
to return to normal operati on. Or, press
OK
if you need to complete the soluti on steps at a
later ti me.
Summary of Contents for RV 5480 iQ
